Sony TRV828 - Manual (Page 112)

112
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
To change the still image to superimpose
Do either of the following:
– Press MEMORY+/– before step 7.
– Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4.
To change the mode setting
Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4.
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
•You cannot use MEMORY MIX function for moving pictures recorded on “Memory
Stick”s.
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
The “Memory Stick” supplied with your camcorder stores 20 images
– For M. CHROM: 18 images (such as a frame) 100-0001~100-0018
– For C. CHROM: 2 images (such as a background) 100-0019~100-0020
Sample images
Sample images stored in the “Memory Stick” supplied with your camcorder are
protected (p. 132).
When you select M. OVERLAP
You cannot change the still image or the mode setting.
During recording
You cannot change the mode setting.
To record the superimposed image as a still image
Press PHOTO in step 7.
Image data modified with your computers or shot with other equipment
You may not be able to play them back with your camcorder.
Recording superimposed images on a “Memory Stick” as a still
image
Before operation
Insert a “Memory Stick” is recorded still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the left
position.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.