Stanton SMX.311 - Manual (Page 13)

Specifications
Specifications
10
input / output impedance & sensitivity:
Line 47k ohm /-14 dBV +/-0.1 dB (200mV)
Phono 47k ohm /-50 dBV +/-0.1 dB (3.16mV)
Mic 10k ohm /-54 dBV +/-0.1 dB (2mV)
Master 1k ohm /0 dB (1V) +/-2 dB
Master Bal (Load=600 ohm) 600 ohm /+4 dBm (1.23V) +/-2 dB
Phones (Load=32 ohm) 33 ohm / 0 dBV (1V) +/- 2 dB
Channel balance: Within 3 dB
frequency response: (Master output, eQ flat)
Line 20-20 kHz +/- 2 dB
Phono 20-20 kHz +2/-3 dB (RIAA)
S/n ratio: (Maximum gain, eQ flat, W/20 kHz lPf, a-weighted)
Line Less than -87 dBV
Phono Less than -70 dBV
Mic Less than -60 dBV
THD + n: (Master 0 dbV output, Maximum gain, W/20 kHz lPf)
Line Less than 0.02% 20-20 kHz
Phono Less than 0.15% at 1 kHz (A-weighted)
Mic Less than 0.15% at 1 kHz (A-weighted)
Note: 0 dBV=1V rms
Crosstalk:
Line More than 65 dB at 1 kHz between L and R.
More than 70 dB at 1 kHz between Channels.
Channel eQ:
Hi 9 +/- 2 dB at 13 kHz
-15 +/- 3 dB at 13 kHz
Mid 9 +/- 2 dB at 1 kHz
below -23 dB at 1 kHz
Low 9 +/- 2 dB at 70 Hz
below -23 dB at 70 Hz
Power Source: DC 6V
Dimensions (H x W x D): 100 mm x 254 mm x 308 mm
Weight: 3.1 kg (w/o power transformer)