Sony DVP-NS715P - Manual (Page 16)

16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 65.
When connecting to a TV that accepts
progressive (480p) format signals
You need to use the COMPONENT VIDEO
OUT jacks to view progressive signals. Hook
up your TV using pattern C on page 18, and
then run Quick Setup on page 25.
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jack on the player to the
TV’s video input jack, and connect the LINE OUT
L/R (AUDIO) 1/2 jacks to the TV’s audio input
jack.
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO VIDEO
LINE OUT COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE P B
P R
1
2
S VIDEO
OUT
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
R
1
2
L
AUDIO VIDEO
LINE OUT
to LINE OUT
(VIDEO)1 or 2
to audio input
1 Audio/video
cord (supplied)
2 Power source
to video input
to LINE OUT
L/R (AUDIO)1
or 2
CD/DVD Player
TV
3 Power source
l : Signal flow