Savin 1045 - Manual (Page 28)

Transmission Mode
14
1
Polling Reserve Report
This report is printed after Polling Re-
ception has been set up.
Note
❒ By default, this report is turned off.
Turn it on with the User Parame-
ters.
⇒ P.136 “Changing the User
Parameters”(Switch03, Bit3)
Polling Result Report
This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.
Note
❒ You can also check the result of a
Polling Reception with the Journal.
❒ By default, this report is turned on.
Turn it off with the User Parame-
ters.
⇒ P.136 “Changing the User
Parameters”(Switch03, Bit4)