Swann Color Video Doorphone - Manual (Page 4)

Operation
9
Functions
4
Hands free Communication
Automatic Display
Unlock Button
Night Vision
This device provides hands free communication between the color TFT-LCD monitor and the outdoor
intercom unit. With a press of a button, you can communicate with the visitor at the door.
When the visitors press the doorbell button , the bell will ring and a picture of the
visitor will be automatically displayed . You can safely identify the visitor before talking
or opening the door.
With a button for opening an electronic door latch, you are able to open the door from the
LCD monitor without going directly to the door.
* Note: This is an optional extra available from Swann. (SW-D-LOCK)
The 6 infrared LEDs on the camera allows you to recognize the visitor during times of low light.
* Night vision distance will vary with the amount of available light.
Visitor at the door
The
visitor
the
door phone will ring and
the is displayed on
LCD monitor.
Once ress "talk” button to LCD
in 2 minutes
he picture will be displayed on the LCD monitor. I
you p communicate with the visitor, the monitor will be shut down
automatically .
When the visitor presses the “call” button, t f no one
answers, the monitor will automatically go back into standby mode after 60 seconds.
Press " ” button
communicate with the visitor.
the talk to A visitor presses the
"call" button on the
intercom.
Warning button
Adjustable volume/contrast
If you get malice visitors, you can press warning button. The intercom unit will give an audible alarm
and bring attention to area around the intercom unit.
If you think the monitor volume is not loud enough or the picture shown on the screen is too bright,
you can alter this by adjusting the volume or contrast wheel found underneath the LCD monitor .
Other operations
mic mic