SIGMA DP2 - Manual (Page 86)

85
VIEWING IMAGES ON A TV
The DP2 camera can be connected to a television or a video
device using the provided AV cable, allowing the recorded images
to be viewed on the television monitor or recorded on video
recording media.
TO CONNECT THE CAMERA TO A
VIDEO DEVICE
1
Open the connector cover.
2
Connect the AV cable to the＜USB / AV＞
terminal on the camera body.
3
Connect the yellow AV cable plug into the
video input terminal and the white plug
into the audio terminal of the TV
4
Turn on the camera and video device.
WARNING !!
•
Please do not use any video cable other than the one provided with
your Sigma DP2 camera. Using other brands may cause damage.
TIP
•
It is recommended that the camera be powered with the AC
adapter (optional) during television playback to avoid draining the
battery.
•
The default mode for the video signal is NTSC. When connecting
the camera to a PAL device, the Video Mode setting in the Camera
Set-up menu must be changed. (See P.112)