Samsung Q1B - Manual (Page 91)

Using System Setup 91
System Setup Buttons(Keys)
The following buttons (keys) are used in System Setup.
When an external keyboard is connected, you can use the keys enclosed by parenthesis. For ex-
ample, you can press the F1 key instead of the Auto Scaler button.
Exiting the System Setup
z Move to Exit menu > Exit Saving Changes using the Joystick and press Enter.
x Select Yes and press the Enter button. The System Setup is closed and Windows is started.
Setup Key Button Function
Auto Scaler Button (F1)
When pressing the Auto Scaler button, Help appears.
When pressing the button again, Help disappears.
Up & Down Keys ( ↑ , ↓ )
Move the Joystick up or down to move the cursor up and
down.
Left & Right Keys ( ← , → )
Move the Joystick left or right to move the cursor left or
right.
u3(F5) / u1(F6)
Press the u3 (F5) / u1 (F6) u3 and u1 buttons to change
the value of an item.
u4(Esc)
Press the u4 button to return to a higher-level menu or to
move to the Exit menu.
Enter Selects an item or opens a submenu.
(F9)
To initialize the setup settings, press the F9 key on the
external keyboard.
If an external keyboard is not connected, select Exit >
Load Setup Default from the setup menu.
(F10)
To save the changes press the F10 key on the external
keyboard.
If an external keyboard is not connected, select Exit >
Exit Saving Changes from the setup menu.