Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72220106 - Manual (Page 2)

Technical Information
Model Door maximum
width Door maximum
height
72220106 44-5/8 ″ (113.3 cm) 70-1/2 ″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
10" (25.4 cm)
4" (10.2 cm)
Note: Right and left end walls are the same, only mirrored.
18" (45.7 cm) Grab Bar
48" (121.9 cm) Grab Bar
48"
(121.9 cm)
72-1/2"
(184.2 cm)
1-1/4"
(3.2 cm)
35-1/4"
(89.5 cm)
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
26"
(66 cm)
8"
(20.3 cm)
16" (40.6 cm)
24" (61 cm)
15-13/16"
(40.2 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
3-5/16"
(8.4 cm) OD
Drain Hole
48-1/8" (122.2 cm) Min
48-1/4" (122.6 cm) Max
3" (7.6 cm)
36"
(91.4 cm)
Grab Bar
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
77"
(195.6 cm)
22" (55.9 cm)
22" (55.9 cm)
14"
(35.6 cm)
3-1/2"
(55.9 cm)
1"
(2.5 cm)
3"
(7.6 cm)
1" (2.5 cm)
46"
(116.8 cm)
1" (2.5 cm)
Back Wall
End Wall
Backer board locations
Product Diagram
ENSEMBLE
TM
ENSEMBLE
TM
48
″ (121.9 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page 2 of 2
1064360-4-
C