Sharp PG-D2870W - Manual (Page 35)

31
Basic
Operation
Resize Mode
This function allows you to modify or customize the Resize mode to enhance the input
image. Depending on the input signal, you can choose a desired image.
Press RESIZE.
See page 47 for setting on menu screen.
COMPUTER
NORMAL FULL NATIVE 16:9
4:3 aspect ratio
SVGA (800 Ч 600)
1068 Ч 800
1280 u 800
800 Ч 600
1280 Ч 720
XGA (1024 Ч 768) 1024 Ч 768
SXGA (1152 Ч 864) 1152 Ч 864
SXGA+ (1400 Ч 1050) 1400 Ч 1050
Other aspect ratios
SXGA (1280 Ч 1024) 1000 Ч 800 1280 Ч 1024
1280 Ч 720 1280 Ч 720 —
— 1360 Ч 768 1280 Ч 722 1360 Ч 768
1366 Ч 768 1280 Ч 720 1366 Ч 768
1280 Ч 768 1280 Ч 768
— 1280 Ч 720
1280 Ч 800 1280 Ч 800 —
Input signal Output screen image
Computer Image type NORMAL FULL NATIVE 16:9
Resolution
XGA and below
4:3 aspect ratio
*1
Resolution
higher than
XGA
*3
SXGA
(1280 × 1024)
5:4 aspect ratio
*1
1280 × 720
16:9 aspect ratio
*1
—*2
—*2
1360 Ч 768
1366 Ч 768
16:9 aspect ratio
1280 × 768
15:9 aspect ratio
*1
—*2
*1
1280 × 800
16:10 aspect ratio
—*2
*1
: Cutout area on which images cannot be projected
: Area where the signals are off screen
*1 The Image Shift function can be used for these images.
*2 Same as NORMAL mode.
*3 In case SXGA+ input.
• RESIZE
button RESIZE
button