Smeg CIR900X - Manual (Page 10)

12
Instructions for the Installer
The entire surface of the cut (fig. 2). Now place the 7 brackets supplied to
secure the top to the supporting structure. The figures below show how to
use these brackets.
The L shaped square as per B in fig. 2 must be fixed to the sides of the
work top. After having fixed the hob it is necessary to fix better the shorter
sides of the appliance using the screws that are supplied.
Important: when fixing this product to the supporting structure, do not use
mechanical or electric screwdrivers and apply only moderate pressure to
the fixing components by hand.
Important: when fixing the product, always use the brackets provided in all
fixing points.
If this product is installed above an oven, the oven must be fitted with a
cooling fan.
Important (only for Ultra Rapid (UR3) burner (4) with raised pan
stand): if the appliance is installed on top of a cabinet, a separator shelf
must be installed as shown here.
If the appliance is installed on top of a built-under oven, no separator shelf
is required.
If the hob is installed above an oven, the oven must be fitted with a cooling
fan.