Smart Technologies SBID Interactive Display 6052i User Manual

Page 18

Advertising
background image

10 |

CHAPTER 2 – INSTALLING THE INTERACTIVE DISPLAY

•

When using mounting accessories, they must comply with the VESA-compatible
(FDMlv1) mounting method.

•

Use M6 screws of the appropriate length.

•

The recommended fasten force is 470–635 N·cm. Mounting interfaces that
comply with the UL1678 standard in North America are recommended.

•

Refer to the instructions included with the mounting equipment for detailed
information.

Consider the following when mounting the interactive display on a stand:

•

Follow the instructions included with the stand or mounting apparatus. Use only
those devices recommended by the manufacturer.

•

Install the interactive display carefully and avoid pinching your fingers.

•

To ensure the interactive display doesn’t tip, fasten it to a wall using a cord or
chain. Ensure the wall and all fastening materials can support the weight of the
interactive display.

Advertising