Remote synchronization settings, Making a remote synchronization, Backing up data – Sony Ericsson P800 User Manual
Page 142: Preconditions
142
Synchronization and backup
This is the Internet version of the user’s guide. © Print only for private use.
Remote synchronization settings
To configure the remote synchronization server
•
In
Applications,
select
Remote Sync > Edit > Preferences
and
fill in the following parameters:
– Server address
– User name
– Password
You might also need to fill in whether to use transport login
under the Protocol tab. Contact your corporate information
services help desk or your service provider for information on
these parameters.
You also need to have at least one configured Internet account
that remote sync can use to connect, see “Control panel” on
page 147.
To select items to synchronize
1. In Remote Sync, select one item in the list you want to be
synchronized.
2. Select the
Enable task
check box.
3. Fill in the
Task name
or leave default.
4. Fill in the
Server database
(Contact your corporate
information services help desk or your service provider).
5. The item you selected to be synchronized is now above the
divider in the list. (Disabled items are below the divider.)
•
Repeat for other items.
Making a remote synchronization
•
Open
Applications > Remote Sync
and tap the
Sync
button.
When ready, the
Task status
column shows today's date for all
successfully synchronized items.
Backing up data
You can use the
P800 Backup and Restore
PC software to back up
the contents stored in your P800 to your computer. Keeping
backups of your P800 contents on your computer means that
you have a separate copy of the contents of the P800, which can
be restored into the P800. Backups should be made on a regular
basis. See the online help for
P800 Backup and Restore
for more
information on how to use the application.
Note All user data will be deleted when the P800 software is
upgraded by a Service Partner. Always back up your data before
handing over the P800 for upgrading, so that you can restore it
afterwards
Preconditions
The
PC Suite for P800
must be installed in the PC and the P800
must be connected to the PC via cable.