Samsung DVD-M301 - Manual (Page 18)

Setting Up the Display Options
1 1 With the unit in Stop mode, press the SETUP button.
2 2 Use the UP/DOWN buttons to select DISPLAY
OPTIONS. Then press the ENTER button.
3 3 Use the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1 . 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2 . 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3 . 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and
display small text clearer.
1 . Field : Select this feature when the screen shakes in the Auto
mode.
2 . Frame : Select this feature when you want to see small letters
more clearly in the Auto mode.
3 . Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit’s front panel display.
1
. Bright : Makes the Front Panel Display bright.
2 . Dim : Makes the Front Panel Display dim.
3 . Auto Dim : Makes the Front Panel Display dim automatically
when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
34 35
Controlling a TV with the Remote
REFERENCE
The remote can also be set up to control most TVs. To program the remote, use the code
that corresponds to your brand.
TV Codes
CODE BRAND
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
SAMSUNG_1
SHARP_1
SONY
MAGNAVOX
SANYO_1
LG_2
RCA
LG_1
TOSHIBA
HITACHI
JVC
PANASONIC_1
MITSUBISHI_2
SAMSUNG_2
SAMSUNG_3
SHARP_1
ZENITH
LG_3
DAEWOO_8
SANYO_2
EMERSON
SHARP_3
SAMSUNG_4
PANASONIC_2
NOBLEX
TELEFUNKEN
NEWSAN
LOEWE
RCA2
1 1 Turn on the TV
2 2 Point the DVD’s remote at the TV.
3 3 While holding the TV POWER button down,
enter the code for your brand.
4 4 If the TV turns off, setup is complete.
Enter other codes of the same brand
if the first code does not work.
5 5 To operate the TV, use the “TV Function
Buttons” described on page 11.
e.g For Samsung D TVs
While holding down the TV button, enter 0. The remote may not be able to control
every model TV of the brands listed.
NOTE