Spalding M8860411 - Manual (Page 15)

15 08/06 ID# M86724C1
13.
5
8
Refer To Instructions
Included With Rim
Hardware For Rim
Assembly.
3
Rim Assembly
6
19
7
16
Before starting rim assembly, tighten nut (26) until it is positioned 6-3/4” from the end of the rod (14)
as shown (Figure A).
Remove rim cover (16), attach rim assembly (3) to backboard (19) and reattach rim cover (16).
** For rim assembly, see instructions included with rim.
27
27
6-3/4”
FIGURE
A.
26
14
15
IMPORTANT!
POLYCARBONITE & ACRYLIC BOARDS:
Carefully cut and peel protective film
away from board prior to attaching rim.
GLASS BOARDS:
DO NOT cut and peel protective film
away from back of board prior to
attaching rim!