Solid State Logic AWS V4 - Manual (Page 29)

25
To enable control of your workstation via HUI or MCU your workstation(s) must be configured to match the
appropriate layer in the list above. This is done using the MIDI Controller configuration page of your workstation.
Below are two examples using Pro Tools 9 and Logic Pro 9:
Pro Tools 9
In the Setup menu, click on Peripherals and select the MIDI Controllers tab. Using MIDI controllers 1, 2 and 3,
select HUI as the MIDI controller Type and assign the MIDI ports for this layer’s DAW to the two MIDI controllers, as
listed in the table above. If Pro Tools has been assigned to Layer 1, the MIDI Controllers window should look like
this: