Speco Technologies 2 Channel HDcctv + 8 Channel Full D1 Digital Video Recorder DVR82HD - Manual (Page 19)

19
3. Name, Function and Connection
3-1. Front Panel
The following information will help you to operate the front panel controls.
Figure 3.1.1. Front Panel
Table 3.1.1. Indication Lamps
Name Description
CH1~10 Indicating that the channel is being recorded.
HDD Indicating that the system is accessing the hard disk.
RECORD Indicating that the system is recording video data.
ALARM Indicating that when sensor(s) is/are triggered or motion is detected.
NETWORK Indicating that when Network client connects through the network.
BACKUP Indicating that USB or DVD-RW storage device is stored images or video.
Table 3.1.2. Front Panel Buttons
Name Description
POWER POWER ON/ OFF
NUMBER Channel keys. For channel 10, press the 0 key. For channel 11, press the +10 and 1
key. For channel 16, press the +10 and 6 key.
REW Press to rewind the footage in playback mode.
F/REW Jump/Step backward. In playback mode, the position moves 60 seconds backward.
FF Press to fast forward the footage in playback mode.
F/ADV Jump/Step forward. In playback mode, the position moves 60 seconds forward.
REC Press to start or stop manual recording.
PLAY/PAUSE Press to play/pause the footage in playback mode.
DISPLAY Press to toggle the screen mode. ( Single, Quad, and 10 splits mode)
SEQ Enable/disable the automatic sequence of display in Single, Quad, and 10 splits mode.
AUDIO Press to set the audio output mode. (Mute, Single Chanel, or Mix)
PTZ Press to control Pan/Tilt/Zoom operations.
SETUP Press to enter SETUP menu.
ALARM Press to set the alarm output mode. (On or Off)
BACKUP Press to capture video in jpeg format in live or playback mode.