Speco Technologies HT-7246iHR - Manual (Page 2)

X. Gamma Correction: 0.45
Y. Video Output: 1 Vp-p, 75 ohms
Z. Signal-to-Noise Ratio: >60 dB
AA. Minimum Illumination 0.002 Lux (intensifier™) / 0.03 Lux (shutter)
BB. Synchronization System: Internal / line lock selectable through OSD
CC. Housing Tamper resistant aluminum composite/polycarbonate.
IP67 water resistant/weatherproof
2.04 ELECTRICAL SPECIFICATIONS
A. Input Voltage: 10-15 VDC +/-10%, 22-28VAC +/-10%
B. Power Consumption: 230mA (DC)/3.8 (AC) maximum
C. Video Connector: BNC
D. Lens Jack: Built-in
F. Video Test Connector Proprietary cable harness with BNC connector
G. Power Supply 12V DC & 24A VC (dual voltage)
2.05 ENVIRONMENTAL SPECIFICATIONS
A. Operating Temperature: -20° to 122°F (-29° to +50°C)
B. Storage Temperature: -30° to 140°F (-34° to +60°C)
C. Operating Humidity: up to 95%, noncondensing
D. Storage Humidity: up to 95%, noncondensing
2.06 PHYSICAL SPECIFICATIONS
A. Dimensions: 5” Diameter x 3.5” H (12.7 cm x 9 cm)
B. Weight: 1.5 lbs. (0.68 kg)
2.07 MECHANICAL SPECIFICATIONS
A. Lens Mount: Varifocal proprietary board type
B. Camera Mount: Wall and ceiling with internal 3-axis mount
2.08 WARRANTY
A. 5 years, parts and labor
2.09 SPECO TECHNOLOGIES MODEL NUMBERS
A. HT7246IHR: 2.8 to 11mm DC auto iris varifocal lens, 10-15 VDC or 22-28 VAC, grey base with
paintable Chameleon™ cover
A. HT7247IHR: 9 to 22mm DC auto iris varifocal lens,10-15 VDC or 22-28 VAC, grey base with
paintable Chameleon™ cover
Works in conjunction with these available accessories:
C. RC485C: Allows Intensifier functions to be remotely controlled
D. RCINT: IR remote control for HT7246IHR/ HT7247IHR
E. CVCTPEXT: Adapts HT7246IHR/ HT7247IHR to accept conduit, also acts as a junction box