Sierra Wireless RAVEN 20070914 - Manual (Page 127)

Raven 1x
122 20070914
*IPPING=n
Set the period to ping (if no valid packets have been received) a
specified address (*IPPINGADDR) to keep the modem alive
(online).
• n=0 : Disable pinging (default)
• n=15‐255 minutes
Note: 15 minutes is the minimum interval which can be set for
Keepalive. If you set *IPPING for a value between 0 and 15, the
minimum value of 15 will be set.
*IPPINGADDR=[d.d.d.d][name]
Set the IP address or valid internet domain name for the Raven
to ping to keep itself alive (online). *IPPING must to be set to a
value other than 0 to enable pinging.
• d.d.d.d=IP address
• name=domain name
*MSCIUPDADDR=name[/port]
Modem Status Update Address ‐ where Name/Port is the
domain name and port of the machine where the modem
status updates will be sent. The status parameters of the Raven
are sent in an XML format.
• name=domain name
• port=port
*MSCIUPDPERIOD=n
Modem Status Update Period ‐ where n defines the update
period in seconds.
• n=0 : Disabled.
• n=1‐255 seconds
*NETWDOG=n
Network connection watchdog: The number of minutes to wait
for a network connection. If no connection is established
within the set number of minutes, the Raven modem resets.
• n=0 : Disabled.
• n=minutes : Default = 120 min.
*RESETCFG
Wipe the non‐volatile data in the modem. Cannot be used with
AceManager.