Speco Technologies Image Sensor 1/3" PIXIM DPS SENSOR - SEAWOLF WDRB1 - Manual (Page 2)

◈SPECIFICATION
Model No. WDRB1
Image Sensor 1/3" PIXIM DPS SENSOR - SEAWOLF
Effective Pixel 758(H) X 540(V) PIXEL
Resolution 690 TV- Line
TV Type NTSC
Sync. Type Internal / External
Scanning System Progressive scan
Video Output
1.0 Vp-p(Sync. Negative)
Termination 75 Ω±10%
Gamma
Characteristic γ = 0.45(Selectable)
White Balance ATW / AWC / MANUAL(2,000 ~ 11,000°K)
Min. Illumination
0.1 Lux(Sense up X64)
0 Lux(131ft range at LED high)
S/N Ratio More 50 dB(AGC OFF)
SDNR ON
Backlight WDR / BLC / OFF
DNR True D&N(AUTO / COLOR / BW)
Day & Night AUTO / MANUAL
Shutter Speed Max. X64(X2, X4, X8, X16, X32, X64)
Test Illuminance
Area
Average test illuminance by front view
Reverse Polarity
Protection
Regulated 12V DC or 24V AC
Power Supply
Max. 500mA(at 12V DC)
Max. 510mA(at 24V AC)
Current
Consumption
Yes
LENS Vari focal auto iris lens
Operation Temp. 14 °F to 122 °F
Preservation Temp. -4 °F to 140 °F
Dimension 3.1 ”(W) X 3”(H) X 6.8”(L)mm
Weight 3.3 Ibs.
※AII specifications are subject to change without notice to
improve the quality.
◈FUNCTIONS
1. Setup for camera functions
①Setup : Press "SETUP" button to go to the menu.
②Up, ③Down : Use "UP" or "DOWN" button to
navigate.
④Left, ⑤Right : Use "RIGHT" or "LEFT" button to
navigate
⑥EXT-VIDEO : Test monitor connection.
⑦LED : LED level adjust.(Factory default is Max.)
2. Camera function setting
OSD
Menu
Select
menu
Sub
menu
Summary
LENS
SELECT
DC Lens type selection
(Fixed iris lens or Vari-focal auto
iris lens)
MANUAL
EXPOSUR
E…
MANUAL
*Preset mode for common application to
speed up installation
PRESETS
CUSTOM User setting value
INDOOR For indoor
WINDOW Maximizing WDR function
OUTDOOR For outdoor
WDR
LOW
Although the subject had a bright
light behind of it, you can see the
subject clearly as well as
background
NORMAL
MEDIUM
HIGH
BLC
OFF Determines that use BLC(Back
Light Compensation) function or
not
ON
AGC
CUSTOM
- -
AGC level selectable
(CUSTOM - - LIMIT : 60) LOW(24)
MEDIUM
(30)
HIGH(36)
SENSE-
UP
Determines that use the SENSE-UP function
or not and SENSE-UP level selectable
OFF
No use sense-up mode
AUTO - -
Use sense-up mode automatically
in low illumination
(Limit : 2X ~ 64X)
MANUAL
- - Sense-up level selectable between
x2 ~ x64
FLICKERL
ESS
OFF
Optimized mode for flicker
(If user choose CRR2 mode,
AWC mode is not available on
the White Balance menu)
WHITE
BALANCE
ATW CRR
Balances the color automatically
depending on the source of light
from 2,000°K ~ 11,000°K
AWC CRR2
Move the camera lens toward to
white paper then press the enter
button to find the optimal white
balance for current environment
(User can not use this mode
when Flickerless is CRR2)
MANUAL
R/B - -
Adjust the Red or Blue values to
shift the color of the object
KELVIN - - Adjust color temperature
DAY&
NIGHT
AUTO
INPUT
DELAY
(Sec) The camera automatically
detects lighting condition and
selects the mode accordingly
COLOR
The picture is always displayed
in Color
B/W
The picture is always displayed
in Black and white
IMAGE
ADJUST…
GAMMA
25 ~ 45 ~
100 Change the GAMMA of the
screen(Default : 45)
SHARPNE
SS MIN ~
MAX Change the sharpness of the
screen(Default : Max)
COLOR
GAIN
-8 ~ 0 ~ 8
Change the color gain of the
screen(Default : 0)
FLIP
OFF
Normal image(No image
inversion)
HORIZ Set a horizontal image inversion
VERT Set a vertical image inversion
BOTH
Set horizontal and vertical image
inversion
ZOOM
OFF Normal image(No Zoom)
ON Max 4x digital zoom available
PAN, TILT : Zoomed in image
can be moved to horizontal and
vertical
MOTION
OFF No use motion detection function
ON…
REA
SELECT Select motion detection area up
to 4 area
AREA
1 ~ 4
- Adjust position & size of motion
detection area
- Press the enter button to move
into the motion area setting
section, whenever you press
the enter button, the mask
color is changed.
- When the mask color is white
you can set the position of
mask by up, down, left and
right button.
- When the mask color is green
and red you can adjust the size
by 4 buttons.
- Press the enter button for a few
second to escape.
PRIVACY
OFF No use privacy mask function
ON - -
MASK
1~12
- Allow you to mask certain
areas of the screen, support
12 privacy zone
- Press the set button to move
into the privacy mask setting
section, whenever you press
the set button, the mask color
is changed.
- When the mask color is
white(or black or RED) you
can set the position of mask by
up, down, left and right button.
- When the mask color is blue,
you can adjust the size by 4
buttons.
- Press the set button for a few
second to escape.
MASK
COLOR Select mask color
(WHITE, BLACK, RED)
FUNCTION
SETUP.. CAMERA
ID SETUP
ID
DISPLAY Display the camera ID on the
screen
CAMERA
ID
Change the camera ID
ID
POSITION Select the position to display the
ID on the screen
SYNC
INT
Internal Sync with 12V DC
power
L.L
External Sync with 24V AC power
(Dual power only)
V-PHASE
Phase contollable at 24V AC
input(L/L mode)
ㆍThe ' ' icon appeared with desired function, press the set
button to move sub menu.
ㆍThe '- - -' icon appeared with function that is unavailable
according to function setting.
ㆍUser can control the menu by using PELCO-D, 2,400bps
only
3B15000A
WDRB1
Speco Technologies is constantly
developing product improvements. We
reserve the right to modify product design
and specifications without notice and
without incurring any obligation.
Rev. 7/5/11.