Sharp AR-M257 - Manual (Page 226)

4 PRINTING FROM MACINTOSH
50 C O N T E N T S
Stapling printed pages (when a finisher is installed)
(part 1)
When a finisher is installed, printed pages can be stapled.
☞
See Basic printing for details on how to open the printer driver.
When a finisher is installed
The following example shows how portrait oriented pages are stapled together.
● The maximum number of sheets that can be stapled is 30. When a saddle stitch finisher is installed, up to 50 sheets can be stapled
(up to 25 sheets when the paper size is B4, Foolscap, or larger).
● Paper sizes that can be used for staple printing are Ledger, Letter, Letter-R, Legal, A3, A4, A4R, B4, B5, B5R, and Foolscap. (B5R
can only be used when a saddle stitch finisher is installed.)
● Paper types that can be used for staple printing are Plain, Letter Head, Recycled and Color.
● Staple printing is not possible when the ROPM function is disabled. (See "CONFIGURING THE PRINTER DRIVER" in the software setup guide.)
● If the finisher is disabled in the key operator programs, the staple and punch functions cannot be used and output cannot be
delivered to the offset tray.
● Stapling is not possible if disabled in the key operator programs (see "DISABLING OF STAPLER" in the key operator's guide).
● The staple function cannot be used in combination with the "No offset" function.
Print data Printing result
The pages are stapled in the upper left-hand corner.
Note