Standard Horizon CP150C - Manual (Page 54)

Page 56 GPS Chart 150C
Speed Over Ground, Course Over Ground, etc.
3.15.2.1 Instruments Data
The STANDARD HORIZON chart plotters can be connected to other instruments
(Depth, Wind, Compass etc) sending NMEA-0183 data or other proprietary data
formats.
The chart plotter reads the following NMEA-0183 sentences from the instruments:
DBT, DPT, HDG, HDM, HDT, MTW, MWV, VHW, VWR, VWT, RTE, WPL.
Data received from the instruments can be shown on dedicated Data Pages or Trend
Graphs (Depth, Wind Speed and Direction graph etc).
Example of SOG graph shown on a dedicated page:
Figure 3.15.2.1 - SOG Graph page
3.15.2.2 NMEA-0183 output (Autopilot output)
STANDARD HORIZON chart plotter can be connected to other instruments (autopi-
lots, data repeaters etc). The chart plotter sends the following set of NMEA-0183
sentences: APA, APB, BWC, GGA, GLL, RMA, RMB, RMC, VTG, BOD, WCV, XTE,
HDG, HSC. The set of NMEA sentence sent by the chart plotter can be customized
(see Input / Output settings).
3.15.3 Data Display
3.15.3.0 Data Window on Chart page
(See Sections 2.17 and 2.18).
3.15.3.1 GPS Status page
Shows GPS satellites information; Fix status, Time and Date, WASS or DGPS
information (Fix Status Icon filed).