Savin 3799nf - Manual (Page 281)

Changing the Paper Size
269
9
Changing the Paper Size
This section describes how to change
the paper size in the main paper tray,
optional Paper Tray Unit and option-
al Bypass Tray Unit to a desired paper
size.
Do not use paper with staples or con-
ductive paper such as aluminum foil
or paper that contains carbon. Doing
so may cause fire.
Be careful not to injure your fingers
when changing copy paper.
Changing the Paper Size in the
Main Paper Tray
The following example explains how
to switch to A4 size paper. To switch
to other paper sizes, follow the same
steps but move the end plate and side
rails to the appropriate size mark on
the tray.
Important
❒ Make sure that copying or printing
of received fax messages is not in
progress.
Note
❒ You can load up to 500 sheets of
copy paper in the main paper tray.
❒ For information on the size and
orientation of copy paper that you
can load in the paper tray, see
p.298 “Paper”
AAAA
Pull out the main paper tray until
it comes to a complete stop.
Make sure to keep the paper tray
horizontal when pulling it out.
BBBB
Remove any remaining paper.
CCCC
Adjust the size mark to the size of
the paper that you are loading.
Turn the dial to adjust it, so that
the desired paper size appears.