Samsung Digimax A400 - Manual (Page 44)

44
Save / Load the camera configuration (MYSET)
1. Press the MENU button and select [MYSET] menu by
pressing the LEFT/RIGHT button.
2. Press the UP/DOWN buttons to select the [SAVE] menu
and press the right button.
3. Press the UP/DOWN buttons to select desired MYSET
slot number to save.
4. Press the OK button to save the current configuration in
the selected MYSET slot.
Use the MYSET mode to save frequently used camera settings (SAVE) and use it later
(LOAD)
[ PROGRAM mode ]
2048
MYSET
LOAD
SAVE
CANCEL
MYSET
CHANGE: MOVE:
[ PROGRAM mode ]
2048
MYSET
LOAD
SAVE
CANCEL
MYSET
CHANGE: MOVE:
Loading the saved camera configuration: available in the PROGRAM mode.
1. Press the MENU button and select [MYSET] menu by
pressing the LEFT/RIGHT button.
2. Press the UP/DOWN buttons to select the [LOAD] menu
and press the right button.
3. Press the UP/DOWN buttons to select desired MYSET
slot number to load.
4. Press the OK button to set the camera configuration as
saved in the MYSET slot.
* The current MYSET slot number is displayed in the top
left of the LCD.
* If you select [CANCEL] in the [LOAD] menu or turn on and off the camera in the MYSET
mode, the MYSET mode will be cancelled.
Saving the camera configuration: Available in the PROGRAM mode.