Sony Ericsson LMD-2030W - Manual (Page 17)

17 Adjustment Using the Menus
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status of the unit.
The following items are displayed:
• Signal format
• Color temperature
• Gamma
• Component level
• NTSC setup
• RGB/Component select
• Scan mode
• Display
• Option
COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the picture
white balance.
You need to use the measurement instrument to adjust the white
balance.
Recommended: Konica Minolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the picture.
Items that cannot be adjusted depending on the input signal are
displayed in blue.
For details of input signals and adjustable/setting items, see page 9.
USER CONFIG menu
You can select a language, etc.
Items that cannot be adjusted depending on the input signal are
displayed in blue.
Submenu Setting
COLOR TEMP Select the color temperature from among
“HIGH”, “LOW” and “USER” setting.
F O R M AT xxxxx
xxxxxxxx
C O L O R T E M P xxxx
G A M M A x
C O M P L E V E L xxxxx
N T S C S E T U P xx
R G B / C O M P S E L xxxx
S C A N M O D E xxxx
S TAT U S ( 1 / 2 ) R r
D I S P L AY
L M D - 2 0 3 0 W
O P T I O N
B K M - 3 2 0 D
S TAT U S ( 2 / 2 ) R r
xC O L O R T E M P xxxx
M A N U A L A D J
· A D J U S T G A I N · · ·
· A D J U S T B I A S · · ·
· C O P Y F R O M
xxx
C O L O R T E M P / B A L
MANUAL ADJ If you set the COLOR TEMP to “USER”
setting, the item displayed is changed from blue
to white, which means you can adjust the color
temperature.
• ADJUST GAIN…: Adjusts the color
balance (GAIN).
• ADJUST BIAS…: Adjusts the color
balance (BIAS).
• COPY FROM: If you select “HIGH” or
“LOW”, the white balance data for the
selected color temperature will be
copied in the “USER” setting.
Submenu Setting
CONTROL You can adjust the picture.
• CONTRAST: Adjusts the picture contrast.
• BRIGHT: Adjusts the picture brightness.
• CHROMA: Adjusts color intensity. The
higher the setting, the greater the
intensity. The lower the setting, the lower
the intensity.
• PHASE: Adjusts color tones. The higher the
setting, the more greenish the picture. The
lower the setting, the more purplish the
picture.
• APERTURE: Adjusts the picture sharpness.
The higher the setting, the sharper the
picture.
• BACKLIGHT: Adjusts the backlight. The
brightness of the backlight changes when
the setting changes.
Submenu Setting
C O N T R O L
xC O N T R A S T x
· B R I G H T x
· C H R O M A x
· P H A S E x
· A P E R T U R E xxx
· B A C K L I G H T x
U S E R C O N T R O L