Solid State Logic DUENDE 82S6MC060A User Manual

Page 20

Advertising

When the EQ is switched to ‘E’ operation (by pressing the

“E” button in the GUI), the bandwidth of the HMF and LMF

sections remains constant at all gains, so at lower gains the

EQ curves are comparatively narrower for a given Q setting.

This is particularly useful for drums, since relatively high Q

is available at low gain settings. However, it is not so suitable

for overall EQ or subtle corrections, as you need to adjust the

Q to maintain the same effect when the gain is changed. The

“E” Series curve could be described as more “aggressive”.

There are three buttons associated with this section of the

plug-in.
EQ IN: Switches the EQ section into circuit.
E: Switches the EQ from ‘G’ operation to ‘E’ operation – see

above.
DYN SC: Switches the EQ section into the sidechain of the

Dynamics section. The Filter Section can be switched

independently of the EQ section. If both Filter and EQ

sections are assigned to the dynamic sidechain the EQ section

precedes the Filter.

100

10k

20k

-25.0

-20.0

-15.0

-10.0

-5.0

0.0

5.0

10.0

15.0

20.0

25.0

Amplitude (dBr) v Frequency (Hz)

Channel Equaliser Curves

'G type'

'E type'

Both

0.0