Samsung VP - MS12(BL) - Manual (Page 68)

68 68
ENGLISH
ISO ( )
ISO .
,
.
1. .
2. [POWER] Miniket .
3. .
◆ .
4. / <ISO>.
5. / (OK) .
6. [MENU] .
◆
ISO .
<Off> ( .
[ ]
✤ ISO , .
ISO .
✤ ISO
✤ ISO 72
✤ <Anti-Shake>, ISO .
✤ [Record / Stop]
.
Photo Mode :
Setting the Capturing Options
Setting the ISO Speed (Sensitivity)
ISO Speed is the rating of a film's sensitivity to light.
Though digital cameras don’t use film, they normally
use the same rating system to describe the sensitivity of
the camera’s imaging sensor.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <ISO>.
5. Select an option by moving the joystick up /
down, and then press the joystick (OK).
6. Press the [MENU] button to exit the menu.
◆ An icon indicating the selected ISO Speed
appears on the screen.
[ Notes ]
✤ The higher the ISO Speed number, the higher
sensitivity to light. It results in brighter imaging under
darker lighting.
✤ High ISO Speed setting may result in picture noise.
✤ Regarding ISO setting in Scene modes, refer to page
72.
✤ If <Anti-Shake> is set, ISO setting will be limited.
✤ While the menu screen is displayed, pressing the [Record / Stop]
button will exit the menu.
Auto
100
200
400
Automatically sets the ISO according to the light
brightness
The standard sensitivity rate, and therefore it is the
usual shooting sensitivity rate.
When you use this in a dark place, you can increase
the shutter speed, but it might come out grainy.
When you use this in a very dark place, you can
greatly increase the shutter speed, but you may get
a rough image due to severe graininess.
4
5
6
MENU
ISO
100
ISO 200
100
200
400
ISO ISO
ISO
ISO
AUTO
Photo Photo
Auto
Move Move Select Select Exit Exit
ISO
400
ISO
Photo
Move Select Exit
OK
23
23
ISO
Photo
Move Select Exit
MENU
ISO
AUTO
ISO
200
ISO
400
100
200
400
ISO ISO
ISO
ISO 100
Photo Photo
Auto
Move Move Select Select Exit Exit OK
23
23
ISO
2592
ISO
100
Photo
Move Select Exit
ISO
Photo
Move Select Exit
IN
23
23 23
3
ISO
IN
2592
Photo
Move Select Exit
ISO
Photo
Move Select Exit
23 23
23
A UTO
100
200
400
ISO
OK Select