SIGMA SD14 - Manual (Page 86)

85
VIEWING IMAGES ON A TV
The SD14 camera can be connected to a television or a videocassette recorder
using the provided video cable, allowing the recorded images to be viewed on the
television monitor or recorded on videotape.
TO CONNECT THE CAMERA
TO A VIDEO DEVICE
1
Open the cover protecting the camera’s VIDEO
OUT, DC-IN, and USB connectors.
2
Connect the video cable to the ＜VIDEO OUT＞
terminal on the camera and to the video input
terminal on the television or video cassette
recorder.
3
Turn on the camera and the video device.
WARNING !!
•
Please do not use any video cable other than provided with your Sigma
SD14 camera, when connecting a video input terminal. Using other brands
may cause damage.
TIP
•
It is recommended that the camera be powered with the provided AC
adapter during television playback to avoid draining the battery.
•
The default mode for the video signal is NTSC. When connecting the camera
to a PAL device, the Video Mode setting in the Camera Set-up Menu must
be changed. (See P.104)