Sony DPP-EX7 - Manual (Page 31)

31 GB
Advanced printing operations
To save the image with the selected effects
You can save the edited image as a new image in the “Memory Stick” or PC
card. The original image remains as it is.
1 Tap [Save].
A dialog box to choose the destination where you save an image either
from “Memory Stick” or PC card is displayed.
2 Tap the desired media to save an image.
The edited image is saved as a new image with a new image number.
When saving completes, the new image number is displayed.
3 Tap [OK].
The image is saved in JPEG format without regards to the original image
file format.
To change the printer settings midway
Tap [Menu]. The Menu screen is displayed and you can change the printer
settings (page 57).
To exit the Effect menu
Tap [Exit]. When you have edited an image, the confirmation dialog box for
saving the image is displayed. Tap [Yes] to proceed with the saving
procedures mentioned above or [No] to abandon edition and exit the Effect
menu. Tap [Cancel] to return to the Effect menu.
Notes
•It may take longer to process an edited image after you press the PRINT button.
•Do not remove the “Memory Stick” or PC card while in the Effect mode. If you do,
the Effect mode ends forcibly and any editing you have done is canceled.
•While saving the image, do not turn off the power or remove the “Memory Stick” or
PC card from the insertion slot. The “Memory Stick” or PC card may be damaged.
•If the “Memory Stick” or PC card is in write protect status, you cannot save an image
in the “Memory Stick” or PC card.
•If an extremely oblong image is edited, margins may appear in the upper or bottom
parts of the image.
• For the “Memory Stick”, see page 86. For the PC card, see page 89.