Sharp MX-B400P - Manual (Page 18)

16
USER AUTHENTICATION
When user authentication is enabled, you must log in before using the
machine. User authentication is initially disabled.
When you have finished using the machine, log out.
User authentication methods
There are two methods for performing user authentication: login by user
number and login by login name and password. Ask the administrator of the
machine for the information that is required to log in.
For details on user authentication, see "USER AUTHENTICATION" in
"Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide.
Login by user number
Login by login name and password
This method requires that you log
in by entering your previously
stored user number (5 to 8 digits)
with the soft numeric keypad.
This method requires that you log
in by entering your login name,
password, and the login
destination. Depending on the
authentication settings, it may also
be necessary to enter your e-mail
address.
OK BACK
OK BACK
mxb400p_us_qck.book Page 16 Friday, November 6, 2009 6:24 PM