Sony RDR-GXD500 User Manual

Page 83

Advertising
background image

D:\DVD

manual\Final\218839311_FM\01GB10ADJ.fm

master page=right

83

Settings

and Adjustments

RDR-GXD500

2-188-393-11(1)

Note

Depending on the disc, “4:3 Letter Box” may be selected
automatically instead of “4:3 Pan Scan” or vice versa.

Pause Mode (DVDs only)

Selects the picture quality in pause mode.

Component Out

Selects whether or not to output video signals
from the COMPONENT VIDEO OUT jacks.

Notes

• When you set “Line1 Output” to “RGB,” you cannot

set “Component Out” to “On.”

• When you connect the recorder to a monitor or

projector via only the COMPONENT VIDEO OUT
jacks, do not select “Off.” If you select “Off” in this
case, the picture may not appear.

Screen Saver

The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).

Scart Setting

Sets the method of inputting/outputting signals
from the SCART jacks on the rear panel of the
recorder. Select an option for each of the items
below according to the combination of jacks and
methods that you are going to use.

Line1 Output
Selects a method of outputting video signals for
the LINE 1-TV jack.

Notes

• If your TV does not accept S-video or RGB signals, no

picture appears on the TV screen even if you select “S
Video” or “RGB.” See the instructions supplied with
your TV.

• You cannot select ”RGB” when “Component Out”

above is set to “On.”

• SMARTLINK is available only when “Video” is

selected.

Line3 Input
Selects a method of inputting video signals for the
LINE 3 jack. The pictures will not be clear if this
setting does not match the type of video input
signal.

Auto

The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.

Frame

The picture, including subjects
that do not move dynamically, is
output in high resolution.

On

Outputs the component video
signals.

Off

Outputs no signals.

16:9

4:3 Letter Box

4:3 Pan Scan

On

Turns on the screen saver
function.

Off

Turns off the function.

RGB

Outputs RGB signals.

Video

Outputs video signals.

S Video

Outputs S-video signals.

Video/RGB

Inputs video signals or RGB
signals.

S Video

Inputs S-video signals.

,

continued

01GB01.book Page 83 Mardi, 7. septembre 2004 9:41 09

Advertising