Setting the clock – Sharp SD-PX2 User Manual

Page 20

Advertising
background image

E-15

ENGLISH

SD-PX2

Preparation f

o

r Use

- Se

tting the

c

loc

k

-

Setting the clock

By setting the unit to the correct time, you can use it not only as a clock but also for
timer playback.

In this example, the clock is set to 9:30 AM.

To confirm the time display:
[When the unit is in the stand-by mode]

Set the MODE 1/MODE 2 switch to MODE 1 and press the DISPLAY button.
The time display will appear for about 5 seconds.

[When the power is on]

Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.

To readjust the clock:

Perform "Setting the clock" from the beginning.

z

In step 2, the time will be displayed.

z

Follow steps 3 - 4.

Note:

Unplugging the unit or power failure will clear the clock setting.
Readjust the clock.

1

Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and
press the TIMER/SLEEP button.

2

Within 10 seconds, press the or
button to select "CLOCK ADJUST",
and then press the ENTER button.

3

Press the or button to adjust the
hour and then press the ENTER but-
ton.

z

Press the or button once to advance the time by 1 hour. Hold it down to
advance continuously.

z

The 12-hour display will appear.

z

"AM" will change to "PM" automatically.

4

Press the or button to adjust the
minutes and then press the ENTER
button.

z

Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.

z

The hour will not advance even if minutes advance from "59" to "00".

z

The clock starts from "0" second (seconds are not displayed).

z

The time disappears after approx. 2 seconds.

Advertising