4 troubleshooting, 1 monitor self-diagnosis, Troubleshooting – Samsung VC240 User Manual
Page 44: Monitor self-diagnosis -1, 4troubleshooting
Advertising
4-1
Troubleshooting
4
Troubleshooting
4-1
Monitor Self-Diagnosis
•
You can check if the product is working properly by using the Self-Diagnosis function.
•
If the monitor displays a blank screen and the Power LED blinks even if the product and the PC are connected, run the
Self-Diagnosis function.
To run a Self-Diagnosis on your monitor, follow these steps:
1. Turn the monitor and the PC off.
2. Separate the D-Sub cable from the product .
3. Turn the monitor on.
4. If the monitor is working properly, the 'Check Signal Cable' message appears.
If this is the case, and your monitor continues to display a blank screen, make sure that there is no problem with the PC or
with the connection between your monitor and the PC. The monitor is working properly.
Advertising