Swann SUPER NIGHT OWL 105 User Manual
Page 2
The Super Night Owl 105 camera is designed for use with any TV, VCR, Security
Monitor or computer with a video capture card. The camera has a color image when
there is light, and black and white when it is dark. It can be used indoors or in a
sheltered position outside. The
can be used for a variety
of purposes including monitoring callers at the door, keeping your car, yard, shop or
warehouse under observation or used as a camera to monitor your baby.
Super Night Owl 105 camera
A.
B.
C.
Camera with Stand and 33ft/10m fixed cable
12Volt DC Power Adaptor (adaptor design varies depending on country)
BNC Male to RCA Male Gender Changer
* To extend the operating distance from your TV or VCR you will need to purchase an A/V extension cable
(sold separately) which are available at most electronics stores.
BNC Female
VCR, TV or MONITOR
OUT
IN
VIDEO
VIDEO
AUDIO
AUDIO
VIDEO IN
3
Your
is designed to produce high quality color images
during daylight and B&W images at night to your television. To help guide you through
the process of setting up the
, we have outlined the steps
and numbered each of the components required in the diagram below.
Super Night Owl 105 camera
Super Night Owl 105 camera
1.
Once you have chosen the best position for the camera,
switch the power to the camera off, and unplug the power
lead from the camera.
2.
When mounting the Super Night Owl 105 camera to your
ceiling or wall, please ensure that you rotate the camera
so that at the top of the camera lens is ‘up’, otherwise you
will find that your pictures are displayed upside down. (see
diagram)
3.
Hold the camera base in the position you wish to fix it, and
mark the holes with an appropriate pen or pencil. Once
this is done, remove the stand and drill a hole with the
appropriate drill bit for the material you are mounting your
camera to and the screws you are using.
4.
Run the camera cable back to the TV/VCR, any holes that
you drill need to be at least 14mm in diameter to allow the
connectors to pass through.
5.
Reconnect the power lead to the camera and switch the
camera power back on.
Note:
Step 1:
BNC Female
BNC Male to RCA Male Gender Changer
"Video In"
BNC Male to RCA Male Gender
Changer
Step 2:
black
black
power adaptor
Step 3:
power adaptor
Step 4:
A/V TV
TV
AV
VCR
VCR
A/V Input
TV
VCR
instructions
VCR
TV
A/V inputs.
At the end of your Super Night Owl 105 camera cable you will find two plugs:
•Black/Chrome (Video BNC Female)
•Black (DC Power)
Plug the
plug (1) into the
(2) and then into the
input (3) (usually located at the back of your TV or
VCR). If you are using a capture card or DVR device that has BNC connectors
fitted, first connect the BNC Male to RCA Female adaptors that should have been
supplied with the device and then plug the
(2) into it as you would with a TV or VCR.
Connect the
plug (4) at the end of your Super Night Owl 105 camera into the
plug at the end of the
(5).
Plug the
(6) into the mains power point in your wall.
If you have an
with RCA sockets you will need to switch the
to the
channel to view the camera. To connect the camera to your
, you will need to
turn the
to the
selection and turn your
onto the channel you
would normally use to view a tape or movie on your
. This channel may be
activated by a button on your remote that is marked with this symbol
, or L1 or
L2 or possibly AV1 or AV2 .Please read the
for your
or
for
more information on using their
BLACK
POWER
CONNECTOR
4
5
1
CAMERA
B
C
2
POWER
ADAPTOR
6
A
2
Installation Instructions
How to connect Super Night Owl 105 camera to your TV or VCR
Contents and Parts Identification
How to connect Super Night Owl 105 camera to your TV or VCR
Mounting the camera on your wall of ceiling
3