Sanyo 2D-3D HDTV LCD DP42851 - Manual (Page 9)

9 Need help? www.sanyoctv.com 1-800-877-5032
1. PLUG IN AC POWER CORD
120V AC, 60Hz
2. TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
3. TV SET LOCATION SELECTION:
Select “Home Mode” to set the HDTV’s backlight to
an Energy Star qualified level, or select “Store
Mode”to set the backlight to a retail display level.
Press ENTER on the desired option to continue.
4. CHANNEL AND AV SIGNAL SEARCH:
Select the Signal Search option and press ENTER to
perform a channel search from an Antenna or a direct
Cable connection, and a signal search from devices
hooked up to the HDTV’s AV input jacks.
5. CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected.
Select Finish Setup and press ENTER to go to one of
your HDTV’s inputs.
NOTE: If you wish to repeat the Signal Search
process select Repeat.
GETTING STARTED
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to hook up
your antenna or cable connection and all AV
equipment correctly to your HDTV.
AV INPUT SELECTION
Press the INPUT key to select the correct AV input for the
video source you wish to watch.
NOTE: Unused AV inputs may be disabled with the Skip
Setting feature (see INPUTS.)
INPUTS ___________________________
ON-SCREEN MENU OPERATION
Choose between English, Spanish and French for your
On Screen menu’s display language.
Press ENTER on the desired language.
Menu Language
SETUP _______________________
Captioning is textual information transmitted along with
the picture and sound. Turning Captioning ON (by
pressing the CAPTION key during normal TV viewing)
causes the HDTV to open these captions (digital or ana-
log) and superimpose them on the screen.
NOTE: Local broadcasters decide which caption signals
to transmit.
Use the CURSOR
▲▼ and
keys to modify Font,
Background, and Foreground of digital caption text.
Display the On Screen menu and use the CURSOR
▲▼
keys to select Setup. Press ENTER.
Digital Caption
Display the On Screen menu and use the CURSOR ▲▼
keys to select Inputs. Press ENTER.
Inputs allows the direct selection of any AV input and
the removal of unused inputs from the AV input loop.
Use the CURSOR
▲▼ keys to select the desired AV input
and press ENTER.
To manage the available inputs press the 1 key to enter
the Skip Setting screen. Use the CURSOR
▲▼ keys to
select an AV input and press ENTER to disable
(uncheck) or enable (check) the highlighted input.