Siemens SpeedStream SS2524 - Manual (Page 10)

6
Chapter 2
Installation
This Chapter covers the physical installation of the SpeedStream Powerline
Wireless Router.
Requirements
Requirements:
•
DSL or Cable Modem
•
PC(s) with the TCP/IP protocol installed
•
Cat 5 Ethernet cables with RJ-45 connectors
•
Installed Powerline network adapter for each PC that will be connected to the network via
Powerline.
•
Installed Wireless network adapter for each PC that will be wirelessly connected to the
network
•
Installed 10/100 Ethernet network adapter for each PC that will be connected to the
network via cabling
Procedure
Figure 4: Installation Diagram
1. Ensure that the SpeedStream Powerline Wireless Router is powered OFF before com-
mencing with installation. Leave your DSL/Cable modem connected to its wall socket
(phone line or cable outlet).
2