Sherwood SD-860 - Manual (Page 42)

42
Continued
• Even when the TEST TONE is set to OFF, you can select the preferred channel and adjust its level, too.
To return to the speaker setup menu screen
• Press the CURSOR button to select the item menu, press the CURSOR / buttons to select “SPEAKER SETUP” and
press the ENTER button.
Then the speaker setup menu screen will be displayed.
• When the RETURN button is pressed, the speaker setup menu screen will be displayed, too.
7
Press the CURSOR button to select the item menu.
8
Set other speakers to preferred levels.
10
Set other setups to your preference.
• You can adjust the volume within the range of -10~0 dB.
• Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
9
After the speakers are all adjusted as preferred, cancel the test tone function.
6
Press the CURSOR / buttons to adjust the volume of the selected speaker as preferred until the sound level of
each speaker is heard to be equally loud.
RC
RC