Sensor setting – Sanyo MPX-MD4 User Manual

Page 27

Advertising
background image

SENSOR SETTING

Menu 5

You can set an area of the screen to be used as a sensor. You can also set the recording mode (ACTIVE REC) for sensor recording,
when the sensor sends a trigger as it detects a movement.

(SENSOR SET)

Setting the ACTIVE REC Mode

1

Press the MENU button 5 times to display the (SENSOR
SET) menu.

2

Press the

l

button to highlight the setting to modify.

3

Using the + (or –) button, select the desired setting,
then press the

l

button.

•

Repeat step 3, until all the settings are as desired.

4

☞

Press the NEXT button to go to the POSITION/LEVEL
SET sub-menu,

☞

Press the MENU button to go to the next menu
screen, or

☞

Press the EXIT button to exit the menu display.

SENSOR SET menu

ACTIVE REC

MODE1: The live pictures from the camera corresponding to the

alarm trigger only are recorded.

MODE2: The live pictures from the camera corresponding to the

alarm trigger are recorded together with the pictures
from the other cameras. (Default setting)

NOTE:

For further details, please refer to the example on the
next page.

DURATION

The recording duration can be set to:
01, 02, 03, 04, 05 (Default setting), 10, 30 seconds

SETTING THE SENSOR POSITION AND
SENSITIVITY LEVEL

Example: To adjust the camera 2 sensor position and

sensitivity level to 3

1

From the (SENSOR SET) menu, press the NEXT button
twice to go to the sub-menu for camera 2.

•

The sub-menu for each camera is selected by pressing
the NEXT button.

•

The camera live picture is displayed, and the sensor
position and sensitivity can be adjusted for that camera.

2

Using the

l

(or

c

) button move the sensor frame down

(or right) to the desired sensor area position.

•

Press and hold the SHIFT button, then press the

l

button to move the sensor frame up.

•

Press and hold the SHIFT button, then press the

c

button to move the sensor frame to the left.

•

Press and hold the SHIFT button, the press the + (or –)
button to adjust the bright of sensor frame.

3

Press the + (or –) button to raise (or lower) the sensor
sensitivity level (03).
NOTE:
The displayed frame will flash if there is movement

within the sensor area during the setting.

The available sensitivity levels are:
OFF (not used), 1, 2,.....10 (10 being the most sensitive)

4

☞

Press the EXIT button to return to the menu display,

☞

Press the MENU button to go to the next menu
screen, or

☞

Press the EXIT button to exit the menu display.

LIVE

QUAD

2

3

(SENSOR SET)

ACTIVE REC MODE2
DURATION 05 S

POSITION/LEVEL SET
PRESS NEXT

(SENSOR SET)

ACTIVE REC MODE2
DURATION 05 S

POSITION/LEVEL SET
PRESS NEXT

LIVE

ZOOM

NEXT

1

(SENSOR SET)

ACTIVE REC MODE2
DURATION 05 S

POSITION/LEVEL SET
PRESS NEXT

CAM2 OFF

2

LIVE

CAM2 OFF

QUAD

3

CAM2 03

Sensor frame

Sensitivity Level

MON2

SHIFT

L8FH5/US (MPX-CD4 GB) 1999. 6. 4

26

English

Advertising
This manual is related to the following products: