Sony RG590S - Manual (Page 14)

14 GB
MHC-GX470/RG590S/RG490S/RG290/RG190.GB.2-668-367-12(1)
Using optional audio
components
1
Connect additional audio
component to the AUDIO IN jack
 on the unit using an audio
analog cord (not supplied).
2
Turn down the volume.
Press VOLUME – (or turn the VOLUME
control on the unit towards –)
 .
3
Select the AUDIO IN function.
Press AUDIO IN  on the unit.
4
Start playing the connected
component.
5
Adjust the volume.
Press VOLUME +/– (or turn the VOLUME
control on the unit)
 .
Adjusting the sound
To add a sound effect
To Press
Reinforce the
bass and create
a more powerful
sound
GROOVE  on the unit
repeatedly until “GROOVE”
appears.
Set the surround
effect
SURROUND

on the unit
repeatedly until “SURR”
appears.
Select the preset
sound effect EQ  repeatedly. To
cancel, press EQ 
repeatedly until “EQ OFF”
appears.
To turn on the subwoofer (MHC-GX470/
RG590S/RG490S only)
Press SUBWOOFER  on the unit repeatedly
until “SUB ON” appears. The SUBWOOFER
indicator
 on the unit lights up. If you later
disconnect the subwoofer, repeat the procedure
until “SUB OFF” appears. The volume of the
subwoofer is linked to the front speakers.