Samsung DVD-L100W - Manual (Page 10)

19
ENGLISH ENGLISH
18
ANALOG INPUT
(White)
(Red)
L
R
AUDIO
Connecting to a Stereo Component
When you connect the DVD player to an audio system, you can listen to higher quality sound.
■ Analog Connection
NO NO TE: TE:
• When connecting to an audio component, set the “Dynamic Comp.” to “Off”. (see page 54)
2-CH Audio Playback
Jack/Plug Color
Audio (left): White
Audio (right): Red
Audio Cable
Audio Amplifier
Connect to input jack
You can enjoy high-resolution video using an S-VIDEO cable when connecting your DVD player
to a TV equipped with an S-VIDEO input jack.
• Always turn off the DVD Player and TV before you connect any cables.
Caution
• If you wish to view video on your TV only, close the display panel of your DVD player.
Playback will continue and audio to the speakers will be cut off.
• With the display panel shut, use the remote to control the DVD player.
• For power saving, press the LCD ON/OFF button to power off the LCD display.
To view video with a TV
1. Turn on the TV.
2. Adjust the TV input to the one that your DVD player is connected to (“AV”, “VIDEO”).
3. Turn on the DVD player, and start playback.
Connecting to a TV
Jack/Plug Color
Video: Yellow
Audio (left): White
Audio (right): Red
Connect to a TV equipped with external connection jacks