Sony A-AY7-100-11(1) - Manual (Page 8)

8
11
Connect your CLIÉ handheld to the computer by the cradle
or the USB cable and perform the HotSync.
AudioPlayerAUA10E.prc and AudioPlayerSkin.prc are installed on
your CLIÉ handheld during the HotSync operation.
12
After the HotSync operation ends, tap [Reset] on your CLIÉ
handheld screen.
After installing the software, performing soft-reset of your CLIÉ
handheld is required.
If you install Audio Player for Adapter using another procedure, you have
to perform soft-reset of your CLIÉ handheld after installation.
If you want to delete Audio Player for Adapter from your CLIÉ
handheld
• See “Removing add-on applications” in the operating Instructions
supplied with your CLIÉ handheld.
• After deleting Audio Player for Adapter, perform soft-reset of your CLIÉ
handheld
If you delete Audio Player for Adapter manually not performing the
operation in “Removing add-on applications” in the operating
Instructions supplied with your CLIÉ handheld.
Delete AudioPlayerSkin.prc manually at the same time you delete Audio
PlayerAUA10E.prc.
Installing the software