Sega 999-1108 - Manual (Page 66)

59
10 - 2 REPLACING THE SWITCH
In case 4-speed Shifter operability is poor, malfunction of or damage to the Microswitch of
Mechanism can be considered. The 4-speed Shifter has 3 Microswitches. Be sure to check
which Switch malfunctions prior to performing work.
Remove 4-speed Shifter as per procedure 10 -1.
Disconnect the wiring connected to the Microswitch.
Take out 2 screws to replace the Microswitch.
Check to ensure that the Switch goes ON and OFF in consistency with the operation.
SCREW (2)
M2.3 X 10, w/flat & spring washers
FIG. 10. 2
PHOTO 10. 2
MICROSWITCH
509-5636
1
2
3
4