Star Micronics SP500 Series - Manual (Page 8)

3. Removing the paper
1. Remove the paper as a roll on the rewinder shaft from the rewinder.
2. Slide the paper to the left to remove it from the rewinder shaft.
3. 取出 纸
１. 把卷 纸器上的纸全卷到卷到卷纸轴上。
２. 将卷 纸向左轻推，从卷纸轴取出。
18. Close the cover and ress the FEED button one time. Becomes a allowable print
and complete the setting.
18. 盖回盖子，按 进纸开关一次。变成允许的一种打印并完成设置。
17. Turn the rewinder shaft clockwise to take up the slack in the paper.
Caution: If the paper tends to slack during use, use the same procedures to take
up that slack.
17. 顺时针转动卷纸轴，卷紧松的纸。
注意：如果打印 纸在使用过程中趋于松弛，用同样的步骤消除松弛。
- 15 - - 14 -