Sony HTD-710SS - Manual (Page 22)

masterpage:Left
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB04BSC_HTR-
10SS-CEL.fm]
22 GB
model name1[HTR-210SS]
[2-599-618-11(2)]
A LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
B SLEEP: Lights up when sleep timer is
activated.
C Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
D ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
E ; PLII: “; PL” lights up when the receiver
applies Pro Logic processing to 2 channel
signals in order to output the center and
surround channel signals. “; PLII” lights up
when the Pro Logic II Movie/Music decoder is
activated.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding do not function for DTS format signals.
F D.RANGE: Lights up when dynamic range
compression is activated (page 26).
G Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 17–21 for tuner operations.
H COAX: Lights up when the source signal is a
digital signal being input through the COAX
terminal.
I OPT: Lights up when the source signal is a
digital signal being input through the OPT
terminal.
J DTS: Lights up when DTS signals are input.
K SW: Lights up when the audio signal is output
from the SUBWOOFER jack.
About the indications in the display
L C R
SL S SR SW STEREO MONO
D. RANGE
MEMORY
DIGITAL SLEEP
PL RDS
OPT COAX
LFE
DTS
7 8 qa q; 9
2 1 3 4 5 6
L C R
SL SR
GB01COV_HTR-210SS-CEL.book Page 22 Wednesday, May 18, 2005 10:15 AM