Sony HTD-710SS - Manual (Page 38)

masterpage:Left
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB09ADD_HTR-
10SS-CEL.fm]
38 GB
model name1[HTR-210SS]
[2-599-618-11(2)]
Amplifier section
Power Output
1)
Models of area code CEL, CEK
(4 ohms 1 kHz, THD 0.7%)
FRONT 2) : 70 W/ch
CENTER
2)
: 70 W
SURR
2)
: 70 W/ch
(4 ohms 100 Hz, THD 0.7%)
SUBWOOFER 2) : 70 W
(4 ohms 1 kHz, THD 10%)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
(4 ohms 100 Hz, THD 10%)
SUBWOOFER
2)
: 100 W
1) Measured under the following conditions:
2) Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate Frequency 10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK
With 9-kHz tuning scale: 531 - 1,602 kHz
Antenna
Loop antenna
Intermediate Frequency 450 kHz
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430 Ч 64 Ч 337 mm
including projecting parts
and controls
Mass (Approx.) 3.3 kg
Speaker section
HTD-710SF only
• Front speakers (SS-MSP800)
• Center speaker (SS-CNP800)
• Surround speakers (SS-MSP800B)
Front/center speakers Full range, magnetically
shielded
Surround speakers Full range
Speaker units
Front/surround speakers
70 × 100 mm cone type,
25 mm Nano Fine Dome
Tweeter
Center speaker 55 × 110 mm cone type,
25 mm Nano Fine Dome
Tweeter
Enclosure type Bass reflex
Rated Impedance 4 ohms
Dimension (w/h/d) (Approx.)
Front/surround speakers
265 Ч 1,108 Ч 265 mm
Center speaker 300 Ч 76 Ч 116 mm
Mass (Approx.)
Front/surround speakers
3.5 kg
Center speaker 1.2 kg
Specifications
Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
SA-CD/CD, VIDEO 1, 2 Sensitivity: 1 V
Impedance: 50 kiloohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/CD
(Optical) Sensitivity: –
Impedance: –
Gain levels ±6 dB, 1 dB step
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 110 W
GB01COV_HTR-210SS-CEL.book Page 38 Wednesday, May 18, 2005 10:15 AM