SMC Networks TIGERSWITCH 10/100 - Manual (Page 41)

B
ASIC
C
ONFIGURATION
2-9
Basic Configuration
Displaying System Information
You can easily identify the system by providing a descriptive
name, location and contact information.
Command Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management
subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has
been up.
• MAC Address
1
– The physical layer address for this switch.
• Web server
2
– Shows if management access via HTTP is
enabled or disabled.
• Web server port
2
– Shows the TCP port number used by the
Web interface.
• POST result
2
– Shows results of the power-on self-test
1: Web: See “Setting the IP Address” on page 2-11 .
2: CLI Only
Port
Configuration Enables the changing of port authentication
features 2-103
Statistics Displays a per-port statistical readout 2-107
Menu Description Page