Sharp IM-DR410E User Manual

Page 32

Advertising
background image

03/7/21 IM-DR410E_5.fm

32

IM-DR410E

IM-DR410E TINSE0550AWZZ

Ad

v

a

n

c

e

d

Fe

at

ur

es

-T

it

li

n

g

a

M

in

iD

is

c

-

Titling a MiniDisc (continued)

!

To add characters

!

Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the master MiniDisc to another
MiniDisc (for stamping).

1

Put the unit in the character input mode.

(Perform steps 1 - 5 on page 30.)

2

Press the VOL + or VOL - button to move the
cursor to the character before which you
want to add a new character.

3

Select the character to add.

(Perform steps 6 - 8 on page 30.)

4

Press and hold down the MENU/ENTER but-
ton for 2 seconds or more.

"

"TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.

"

You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.

1. What is a master MiniDisc?

A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)

2. What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same or-
der as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)

Advertising