Southbend South Bend EVS Toolroom SB1012 - Manual (Page 106)

Customer Service
We stand behind our machines. If you have any service questions, parts requests or general questions
about the machine, feel free to contact us.
South Bend Lathe Co.
P.O. Box 2027
Bellingham, WA 98227
Phone: (360) 734-1540
Parts Department: (417) 886-2954
Fax: (360) 676-1075 (International)
Fax: (360) 734-1639 (USA Only)
Email: [email protected]
Updates
For your convenience, any updates to this manual will be available to download free of charge
through our website at:
www.southbendlathe.com
Scope of Manual
The parts breakdowns in this manual are provided to facilitate the service and repair of this machine
as follows: (1) By helping the mechanic understand how and where individual parts fit together;
and (2) by establishing a numbering system from which available replacement parts can be ordered.
Please note that not all parts shown are available for purchase and some individual parts may only
be available in assemblies with other parts. In the case of fasteners or other off-the-shelf hardware,
we will happily provide customers with replacements, but for the sake of expediency, these can also
be found at your local hardware or industrial supply store.
Manual Feedback
We've made every effort to be accurate when documenting this machine. However, errors sometimes
happen or the machine design changes after the documentation process—so the manual may not
exactly match your machine. If a difference between the manual and machine leaves you in doubt,
contact our customer service for clarification.
We highly value customer feedback on our manuals. If you have a moment, please share your
experience using this manual. What did you like about it? Is there anything you would change to
make it better? Did it meet your expectations for clarity, professionalism, and ease-of-use?
South Bend Lathe, Inc.
C /
O
Technical Documentation Manager
P.O. Box 2027
Bellingham, WA 98227
Email: [email protected]