Sony SPP-A968 - Manual (Page 19)

Basics
Basics
19 US
1
When you hear the phone ring,
pick up the handset from the
base unit, and press (TALK) .
“TALK” appears on the display
and the IN USE lamp on the
base unit lights up.
During a conversation, you can
adjust the handset volume.
Follow the procedure described
in the table below.
2
When you’re done talking, press
(OFF) or replace the handset on
the base unit.
The display and the IN USE
lamp on the base unit go off.
Receiving calls
(CALL WAITING/FLASH)
continued
(VOL/PGM)
To Do this
Adjust the handset volume During phone conversations, press
(VOL/PGM).
Each press of (VOL/PGM) switches the
speaker volume by four levels.
Switch to another call Press (CALL WAITING/FLASH).
(“call waiting” service*) Press (CALL WAITING/FLASH) again to
return to the first caller.
If you have subscribed to the Caller ID service
• the caller’s number and/or name appears on the display when you receive a
call (see page 39).
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCH DIAL buttons or in the Phone Directory (memory
match function; see page 39).
Additional tasks
* You need to subscribe to the service from your telephone company.
Tip
To inform you of an incoming call, the display shows “**RINGING**” when
ringing.