Sharp MX-7001 - Manual (Page 124)

43
7
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
8
Press the [COLOR START] key ( )
or the [BLACK & WHITE START] key
(
).
Scanning begins.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you placed the originals on the document glass, scan each
page one page at a time.
When using sort mode, change originals and press the
[START] key. Repeat until all pages have been scanned and
then press the [Read-End] key. (For the second original and
following originals, use the same [START] key as you did for
the first original.
To cancel scanning of the original and copying...
Press the [STOP] key (
).
When the inserter is installed, the "Extra" size paper loaded in the bypass tray will be delivered to the right tray.
2. 8½x11 8½x11
3. 11x17
4. 8½x14
1. 8½x11
Paper Select OK
Plain Plain
Plain
Plain
Plain
Paper Tray Bypass Tray
(1) (2)
or