Samsung TXN 2434F - Manual (Page 29)

O
P E R AT I O N
29
3
Press the œ œ or √ √ button.
The TV will begin
memorizing all of the
available channels.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press the MENU button at any time
to interrupt the memorization
process and return to the Channel
menu.
2
Press the ▼ button to
select “Auto program”.
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~3
on previous page.
Press the MENU button,
then press the
▼ button
twice to select “Channel,”
then press the √
√ button.
4
After all the available channels are stored, the Auto program
menu reappears. Press the MENU button twice to exit.